Table of Contents
Advertisement
20
English
1
22_002_7381_2_DFU-Booklet_A6_v1.indd 20
5 Remove the shaving heads and place new
2
ones in the shaving head holder.
Discard the used shaving heads
1
immediately to avoid mixing them with the
new shaving heads.
Make sure the two wings of the new
shaving heads fit exactly into the recesses
of the shaving head.
6 Place the retaining ring back onto the shaving
head holder. To reattach the retaining ring,
turn it against the direction of the arrows
indicated in and on the retaining ring.
2
Make sure the retaining ring is fixed
properly. The four wings of the retaining
ring have to be located exactly under the
recesses of the shaving head holder.
7 Reattach the shaving head holder to the
shaving unit ('click').
If the shaving unit does not close smoothly,
check if you have positioned the shaving
heads properly and if the retaining rings are
fixed properly.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
29/08/17 16:19
Advertisement
Table of Contents
