Table of Contents
Advertisement
18
English
Cleaning the beard styler attachment
22_002_7381_2_DFU-Booklet_A6_v1.indd 18
7 Reattach the shaving head holder to the
shaving unit ('click').
Never dry the trimmer with a towel or tissue,
as this may damage the trimming teeth.
Clean the beard styler after each use.
1
Pull the comb off the beard styler.
Note: Grab the comb in the center to pull it
off the beard styler. Do not pull at the sides
of the comb.
2 Switch on the shaver.
3 Rinse the beard styler and the comb
separately under a warm tap.
4 After cleaning, switch off the shaver.
5 Carefully shake off excess water and let the
beard styler and comb air dry completely.
6 For optimal performance, lubricate the
teeth of the attachment with a drop of
mineral oil regularly.
29/08/17 16:19
Advertisement
Table of Contents
