Table of Contents
Advertisement
10
English
Charging with the power cord
22_002_7381_2_DFU-Booklet_A6_v1.indd 10
- Charge the shaver before you use it for the
first time and when the display indicates
that the battery is almost empty.
Note: First time charging or charging after a
long period of non-use requires 90 minutes of
charge time.
- Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 40 minutes.
Note: You cannot use the shaver while it is
charging.
Note: Depending on your shaving/styling
behavior and beard type, the operating time
may vary over time.
1
Make sure the shaver is switched off.
2 Put the small plug in the shaver and connect
the power plug into any 100V to 240V AC
outlet. Use only the power cord provided.
The light on the power plug lights up to
show that the shaver is charging.
Note: The light on the power plug does not
change color and does not go out when
the shaver is fully charged.
3 After charging, remove the power plug from
the power outlet and pull the small plug
out of the shaver.
Note: An adapter plug may be necessary
for cord usage in some foreign countries.
Use an attachment plug adapter of the
proper configuration for power outlet.
29/08/17 16:19
Advertisement
Table of Contents
