54
Using Your Printer
Item
DUP.TOP
DUP.LEFT
S-BIND
L-BIND
FUSER CLEAN
Values and Functions
5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the top margin of the print
materials when the Duplex menu item is set to
Long.
5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the left margin of the print
materials when the Duplex menu item is set to
Long.
0 (Factory Default)
0~99mm (In increments of 1)
This item lets you select the left margin for the
binding when short edge duplexing.
0 (Factory Default)
0~99mm (In increments of 1)
This item lets you select the left margin for the
binding when long edge duplexing.
If there happens random dirty spots on the back
side of paper, Select FUSER CLEAN.
It cleans fuser contamination.