Specifications - Hover-1 DREAM Operation Manual

OPERATING PRINCIPALS
The Dream uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The Dream also uses a control system to drive the
motors that are located within the wheels. The Dream has a built-in
inertia dynamic stabilization system that can help assist with balance
when moving forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Tire Type:
UL Certification:
WARNING
Any Dream that does not work properly
can cause you to lose control and fall.
Inspect the entire Dream thoroughly before
every ride, and do not ride it until any
problems have been corrected.

SPECIFICATIONS

Hover-1 Dream (H1-DRM)
™
16.3 lbs (7.4 kg)
44-220 lbs (20-100 kg)
Up to 7 mph (11.3 km/h)
Up to 6 miles (9.7 km)
10°
0°
Up to 5 hours
Lithium-ion
25.2 V
4.0Ah
AC 100-240V, 50/60Hz
1 Inches (2.54 cm)
Non-Pneumatic Solid Tires
UL 2272 approved
5