Gear Ratio - Corally DEMENTOR XP 6S Quick Start User Manual

GEAR RATIO

MOTOR PINION MOD1.0
High-performance 13T tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures
unparalleled concentricity. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for
vibration-free operation. Each pinion is marked with the tooth number for easy and quick identification.
www.corally.com/Pinions-Gears/Pinions-MOD1/
Km/h Mph Km/h Mph Km/h Mph Km/h Mph Km/h Mph Km/h Mph
Gear 11T Pinion
50T
4S 61
6S 92
52T
4S 59
6S 89
OK
NOTE : The speed indicated in the table is a theoretical speed for information purposes.
The real speed varies according to the type of terrain, electronic equipment, atmospheric conditions and other driving parameters.
GEAR MESH ADJUSTMENT
If the gear mesh is not correct, you wear out the spur gear prematurely, the transmission will make noise, give unnecessary load on the
motor (higher consumption, heating of the transmission).
14
• Special hardened steel
• CNC cut teeth for perfect teeth shape and concentricity
• Module MOD1
• fits all cars with MOD1 gears (1/8 Scale)
• for 5.0mm motor shafts
12T Pinion
15,04 13,78
38 67 42
57 100 62
15,64 14,33
37 64 40
55 97 60
Factory fitted Usable but not recommended
+ TORQUE
PAPER STRIP 1x8cm
1. Loosen the screws.
2. Insert the paper strip.
3. Push the motor against the spur gear.
13T Pinion 14T Pinion
12,72 11,81
73 45 78 49
109 68 117 73
13,23 12,29
70 43 75 47
105 65 113 70
+ SPEED
GEAR RATIO : 3.31
15T Pinion 16T Pinion
11,03 10,34
84 52 89
126 78 134
11,47 10,75
80 50 86
121 75 129
Not recommended, at your own risk
4. Turn the spur gear to run the paper through
the teeth.
Stop when the paper is in the middle.
Make sure that the motor pinion is against
the spur gear.
5. Tighten the fixing screws.
55
83
53
80