Gear Ratio - Corally RADIX XP 6S Quick Start User Manual

GEAR RATIO

MOTOR PINION MOD1.0
High-performance 13T tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures
unparalleled concentricity. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for
vibration-free operation. Each pinion is marked with the tooth number for easy and quick identification.
www.corally.com/Pinions-Gears/Pinions-MOD1/
Km/h Mph
Gear 11T Pinion
13,83
46T
4S 48 30
6S 71 44
OK Factory fitted
+ TORQUE
NOTE : The speed indicated in the table is a theoretical speed for information purposes.
The real speed varies according to the type of terrain, electronic equipment, atmospheric conditions and other driving parameters.
GEAR MESH ADJUSTMENT
If the gear mesh is not correct, you wear out the spur gear prematurely, the transmission will make noise, give unnecessary load on the
motor (higher consumption, heating of the transmission).
14
• Special hardened steel
• CNC cut teeth for perfect teeth shape and concentricity
• Module MOD1
• fits all cars with MOD1 gears (1/8 Scale)
• for 5.0mm motor shafts
Km/h Mph Km/h Mph
12T Pinion 13T Pinion
12,68 11,71
52 32 56 35
78 48 84 52
Usable but not recommended
PAPER STRIP 1x8cm
1. Loosen the screws.
2. Insert the paper strip.
3. Push the motor against the spur gear.
Km/h Mph Km/h Mph
14T Pinion 15T Pinion
10,87 10,14
60 38 65 40
91 56 97 60
Not recommended, at your own risk
+ SPEED
Km/h Mph Km/h Mph
16T Pinion 17T Pinion
9,51 8,95
69 43 73 46
104 64 110 68
4. Turn the spur gear to run the paper through
the teeth.
Stop when the paper is in the middle.
Make sure that the motor pinion is against
the spur gear.
5. Tighten the fixing screws.
GEAR RATIO : 3.31
Km/h Mph
18T Pinion
8,45
78 48
117 72