Battery Removal - Sound Devices 744T Quick Start Manual

Transferring Files to Computer:
Files are transferred via Firewire. The 744T will
show up on your computer like any other Fire-
wire drive.
1. Turn on the computer and the 744T.
2. Connect your computer's Firewire cable to the
port on the right panel of the 744T.
3. Make certain that menu item 2: FIREWIRE:
CONNECTION is set to COMPUTER /CON-
NECT. Otherwise, it will think that your com-
puter is just a hard drive.
When successfully connected via FireWire. When
connected, all audio functionality of the 744T is
defeated.
Each day of recording creates a new folder on the
744T.

Battery Removal:

Push the small silver button with a pen
or paper clip and slide the battery to the
right.
This guide is just a basic overview. Much important information has been left out. It is not a substitute for
proper instruction or practice.
It is very important that you plan your entire post-production path BEFORE you start recording sound for
it.
Please see the 744T User Guide for more complete information.
After 1 day, you should see something like this:
Copy the files to your media drive.
Eject the drive from your computer.
Disconnect the Firewire cable.
ver.7 10-26-10
8