Network Setup; Security - Samsung CLX-8385ND Series User Manual

Network Setup

You may set up the network with the machine's touch screen. Before
doing that, you must have the information concerning the type of network
protocols and computer system you use. If you are not sure which setting
to use, contact your network administrator to configure this machine
network.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK.
3 Press the Setup tab > Network Setup.
Option
TCP/IP Protocol Select appropriate protocol and configure
parameters to use the network environment.
Note: There are lots of parameters to be set,
therefore, if you are not sure, leave as it is, or
consult the network administrator.
Ethernet Speed You can select the communication speed for
Ethernet connections.
Clear Setting Reverts the network settings to the default
values.
802.1x You can select the user authentication for
network communication.
For details information consult the network
administrator.
Description
Option
IPv6 Machine supports IPv6 addresses for network
printing and managements.
• IPv6 Activate: When you select On, the Host
• DHCPv6 Configuration: If you have a
This feature lets you control and lock all outgoing data, or change the
password.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the Setup tab > Security.
12.7
<Machine status and advanced set-
Description
Name and Link-Local Address will
automatically be entered into the address
field.
DHCPv6 server on your network, you can set
one of the option for default dynamic host
configuration.
• Routers: Use DHCPv6 only when
requested by a router.
• DHCPv6 Addresses: Always use
DHCPv6 regardless of router request.
• DHCPv6 Off: Never use DHCPv6
regardless of router request.

Security