Kenwood TS-590SG Service Manual page 95

Item Condition
12. POC 10W 1) Menu No.: 32 (14.1MHz, CW)
Transmit
13. Power 1) Menu No.: 33 (14.1MHz, CW)
meter 10W Transmit
14. POC 5W 1) Menu No.: 34 (14.1MHz, CW)
Transmit
15. Power 1) Menu No.: 35 (14.1MHz, CW)
meter 5W Transmit
16. TGC GAIN 1) Menu No.: 36 (14.1MHz, CW)
Transmit
17. ALC meter 1) Menu No.: 37 (14.1MHz, CW)
Transmit
• Start point
• Zone max. 2) Menu No.: 38 (14.1MHz, CW)
(15 dots) Transmit
point
18. Band TGC 1) Menu No.: 40 (1.83MHz, CW)
(HF) Transmit
• 1.8M
• 3.5M 2) Menu No.: 41 (3.51MHz, CW)
Transmit
• 5.0M 3) Menu No.: 42 (5.3MHz, CW)
Transmit
• 7.0M 4) Menu No.: 43 (7.01MHz, CW)
Transmit
• 10M 5) Menu No.: 44 (10.1MHz, CW)
Transmit
• 18M 6) Menu No.: 45 (18.1MHz, CW)
Transmit
• 21M 7) Menu No.: 46 (21.1MHz, CW)
Transmit
• 24.9M 8) Menu No.: 47 (24.9MHz, CW)
Transmit
• 28M 9) Menu No.: 48 (28.1MHz, CW)
Transmit
19. Band TGC 1) Menu No.: 49 (50.1MHz, CW)
Transmit
• 50M
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Power meter Rear ANT 1 Front
150W ATT panel panel
TS-590SG
Adjustment
Parts Method
[ ] Set the adjustment 10W±0.5W
or [ value within the
] limit of the specifi ed
power.
[ ] 1 push Power meter lights up to 10W
position.
[ ] Set the adjustment 5.0W±0.3W
or [ value within the
] limit of the specifi ed
power.
[ ] 1 push Power meter lights up to 5W
position.
[ ] Set the adjustment 107W±3.0W
or [ value within the
] limit of the specifi ed
power.
[ ] 1 push ALC meter lights up to 1.
ALC meter zone max.
[ ] Set the adjustment ALC meter 15 dots
or [ value to become
] the specifi ed ALC
meter.
Specifi cations / Remarks
95