Specifications - Kenwood TS-590SG Service Manual

General
Mode
Number of memory channels
Antenna impedance
Supply Voltage
Grounding method
Current
Usable temperature range
Frequency stability without SO-3
Frequency stability with SO-3
Dimensions (W x H x D Projections not included)
Weight
Transmitter
Frequency range
Output power
Maximum frequency deviation (FM)
Modulation
Spurious emissions
Carrier suppression (SSB)
Unwanted sideband suppression (modulation frequency 1.0 kHz)
Transmit frequency response
XIT shift frequency range
Microphone impedance

SPECIFICATIONS

J3E (SSB)/ A1A (CW)/ A3E (AM)/ F3E (FM)/ F1B (FSK)
110 + 10 (Quick memory channels)
50  (with built-in antenna tuner 16.7 ~ 150 )
160 m ~ 6 m band
DC 13.8 V±15%
Negative ground
Transmit (max.) Less than 20.5 A
Receive (no signal) Less than 1.5 A
–10°C ~ +50°C (+14°F ~ +122°F)
–10°C ~ 50°C Within ±5 ppm
–10°C ~ 50°C Within ±0.5 ppm
270 x 96 x 291 mm/ 10.63 x 3.78 x 11.46 inches
Approx. 7.4 kg/ 16.3 lbs
160 m band 1.8 ~ 2.0 MHz (K type)/ 1.81 ~ 2.0 MHz (E type)
80 m band 3.5 ~ 4.0 MHz (K type)/ 3.5 ~ 3.8 MHz (E type)
60 m band 5.1675 MHz, 5.25 ~ 5.45 MHz (K type)
40 m band 7.0 ~ 7.3 MHz (K type)/ 7.0 ~ 7.2 MHz (E type)
30 m band 10.1 ~ 10.15 MHz
20 m band 14.0 ~ 14.35 MHz
17 m band 18.068 ~ 18.168 MHz
15 m band 21.0 ~ 21.45 MHz
12 m band 24.89 ~ 24.99 MHz
10 m band 28.0 ~ 29.7 MHz
6 m band 50.0 ~ 54.0 MHz (K type)/ 50.0 ~ 52.0 MHz (E type)
Max. 100 W
SSB/ CW/ FSK/ FM
Min. 5 W
Max. 25 W
AM
Min. 5 W
Wide ±5kHz or less
Narrow ±2.5kHz or less
SSB Balanced
AM Low power
FM Reactance
160 m ~ 10 m band -50dB or less
6 m band -60dB or less
50dB or more
50dB or more
–6 dB: 400 ~ 2600 Hz
±9.999 kHz
600 
TS-590SG
133