Haier I-Pro 7 Series User Manual page 20

8-Care and cleaning
8-6
8-8
8-10
8-12
20
8.5 Long periods of disuse
8-7
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8-6).
2.
3. Open the door to prevent formation of moisture
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
8
8-9
for instance if the appliance:
hot! Before any action please ensure water has
8-11
cooled down.
1.
2. Push and open service flap. (Fig. 8-9).
3. Provide a flat container to catch leach water
4. Pull the drainhose out and hold its end above the
8-13
5. Take the sealing plug out of the drainhose (Fig.
6. After complete drainage close drainhose (Fig.
7. Unscrew and remove counter clockwise the pump
8. Remove contaminants and dirt (Fig. 8-13).
and odours. Let door open while not used.
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
WARNING!
(Fig. 8-10). There could be bigger amounts!
container (Fig. 8-10).
8-10).
8-11). and push it back into the machine.
8
EN
8