Silvercrest SFB 120 B2 Operating Instructions Manual page 9

Functions of the Foot Bubble Bath
This Foot Bubble Bath has 4 functions available which can be used in various
combinations :
–
–
–
–
Operation
Setup
♦
Place the Foot Bubble Bath on the fl oor in front of a chair. The surface must
be fl at.
♦
Place the function switch 1 at 0 (OFF).
Fitting the attachment for the centre console
♦
Select an attachment 0/q/w for the centre console:
–
–
–
♦
Place the respective attachment 0/q/w in the insertion slot 6 of the
centre console so that it is seated fi rmly. When you want to change it,
simply pull the attachment 0/q/w upwards.
NOTICE
You can put two attachments 0/q/w on the attachment holder 9 and
►
hang them on the edge of the Foot Bubble Bath. Then the attachments 0/
q/w are always to hand.
SFB 120 B2
Air emerging from the air-jets 4 provides for the
1. Bubbles:
formation of air bubbles, which gently and pleasantly
massage the feet.
2. Heat: The foot pad heats itself and thus provides for a constant
water temperature.
3. Massage: The foot accessories with massage nubs create through
vibration a pleasant massage eff ect.
4. Infrared light: The infrared light 7 warms the feet, thus promoting
blood circulation.
Brush attachment w: to stimulate the refl ex zones in the sole of the foot
and for massage.
Roller attachment q: is used to massage and promotes blood circulation.
Callous remover 0: for gentle removal of hard skin.
GB
IE
7