Honda Rebel 2017 Owner's Manual page 74

Engine Oil Changing Engine Oil & Filter
u
Install the oil filter spring into the oil filter
8.
cover, and then install the new gasket and
oil filter cover by tightening the oil filter
cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Install a new sealing washer onto the
9.
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
Fill the crankcase with the recommended
10.
oil ( P. 53,
2 2
cap.
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
72
P. 134) and install the oil fill
Check the oil level.
11.
Check that there are no oil leaks.
12.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Oil filter cover
Gasket
Oil filter cover bolts
P. 69
2
Spring
Oil filter
OUT-SIDE mark