Spark Plug
Checking Spark Plug
u
Install the spark plug. With the plug
7.
washer attached, thread the spark plug in
by hand to prevent cross-threading.
Tighten the spark plug:
8.
If the old plug is good:
●
1/8 turn after it seats.
If installing a new plug, tighten it twice
●
to prevent loosening:
a) First, tighten the plug:
1/2 turn after it seats.
b) Then loosen the plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
NOTICE
An improperly tightened spark plug can damage
the engine. If a plug is too loose, a piston may be
damaged. If a plug is too tight, the threads may
be damaged.
Reinstall the spark plug cap. Take care to
9.
avoid pinching any cables or wires.
68