Samsung SyncMaster 194T User Manual page 13

Connecting the
Monitor
Installing the
Monitor Driver
Installing VESA
compliant mounting
1.
2-1.
2-2.
3.
4.
5.
You may get a blank screen depending on the type of video card you are using, if you connect
simultaneously both the 'DVI-A to D-SUB' and DVI cables to one computer.
If you properly connect your monitor using the DVI-I connector but get a blank or fuzzy screen,
check to see if the monitor status is set to analog. Press Source button to have the monitor
double-check the input signal source.
For the best quality of display,please use a signal cable which Samsung provides.
Connect the power cord for your monitor to the power port on the back of the monitor. Plug the
power cord for the monitor into a nearby outlet.
Using the D-SUB (Analog) connector on the video card.
Connect the 'DVI-A to D-SUB' cable to the DVI-I port on the back of your monitor.
Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI-I Port on the back of your monitor.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the 'DVI-A to D-SUB' connection cable.
In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adapter.
Turn on your computer and monitor. If your monitor displays an image, installation is complete.