Using Both Dhcp And Static Ip Simultaneously - Samsung NX10 User Manual

Using Both DHCP and Static IP Simultaneously

When you are alternatively using networks with either DHCP or static IP addressing,
you can use both of the network connections without reconfiguring using alternative
settings that enable simultaneous configurations of DHCP and static IP.
This function is provided only when your operating system is Windows XP.
1. Click Start > Control Panel > Network and Internet Connections > Network
Connections > Local Area Connection, press the right button of the touchpad,
and then select Properties.
2. Select the Internet Protocol (TCP/IP) item, and then click Properties.
3. In the Alternate Configuration tab, click User configured, and then enter the
appropriate values for the following: IP address, Subnet mask, Default gateway,
Preferred and alternate DNS server, and Preferred and alternate WINS server.
4. When the configuration has been completed, click OK.
Now you can connect to both networks using DHCP and static IP respectively.
24 Users Manual