1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Laptop
  5. NX05BP00Z1
  6. User manual

Samsung NX05BP00Z1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1.1
Notices
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, mechanical photocopying, recording or
otherwise, without the prior written permission of the manufacturer.
The information within this manual is subject to change without notice.
The manufacturer shall not be held liable for technical or editorial errors or omissions
contained in herein; nor for incidental or consequential damages resulting from the
furnishing, performance or use of this material.
Microsoft Windows is a registered trademark of the Microsoft Corporation.
Product names mentioned herein are for identification purposes only, and may be
trademarks and/or registered trademarks of their respective companies.
Macrovision Statement
If your computer has a DVD drive and an analog TV Out port, the following
paragraph applies:
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Copyright 2003 All rights are reserved
Notices i

Advertisement

Table of Contents
loading

Related Manuals for Samsung NX05BP00Z1

Summary of Contents for Samsung NX05BP00Z1

  • Page 1 Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein;...

  • Page 2: Important Safety Information

    Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.

  • Page 3: Care During Use

    Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries.

  • Page 4: Laser Safety

    Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard.

  • Page 5: Regulatory Compliance Statements

    Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device.
  • Page 6 In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated.

  • Page 7: United States Of America

    United States of America Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 8: Fcc Part

    The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
  • Page 9 If the terminal equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
  • Page 10 Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté...
  • Page 11 Telecommunications per DOC notice (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users’...

  • Page 12: European Union

    European Union The following information is only applicable to systems labeled with the CE mark European Directives This Information Technology Equipment has been tested and found to comply with the following European directives: • EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/ EEC as per –...
  • Page 13 European States qualified under wireless approvals: Austria, Belgium, Denmark, Finland, France (with frequency Germany, Greece, Ireland, Italy, Luxembourg, The restrictions), Netherlands, Portugal, Spain, Sweden and the United Kingdom. Accept EU Iceland, Liechtenstein, Norway and Switzerland European States with restrictions on use: In France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless LAN.

  • Page 14: Using Your Documentation

    Using Your Documentation Congratulations on your purchase of a notebook computer with the Windows® XP operating system. Whether you are new to using a portable computer or are an experienced user, this user’s manual can help you get the most from your computer. Manual Documentation Conventions Information Icons Three icons and their associated messages appear in this manual.

  • Page 15: Touchpad Conventions

    CD-ROM Device Naming Convention In many installation programs you will have to get a program from the CD-ROM device. The program installation sequence assumes that the CD is drive d:\, however this is not always the case. The name of the CD-ROM drive is the letter following the letter assigned to your last HDD.

  • Page 16: Getting Started

    Getting Started Introducing Your Computer The next section will explain the location of all of the buttons, status indicators and equipment needed to operate your notebook computer. Front Scroll Wheel Speaker Memory Stick Slot (option, p30) LCD Latch Hot Keys (p14) Status Indicators (p16) Power Button Keyboard (p8)

  • Page 17: Right Side

    Right Side Microphone Jack Earphone Jack Left Side Fan Vent Modem Port (p31) Back Side TV-Out Port (S-VHS) DC Jack S/PDIF Port (p26) 4 Users Manual CD Drive (option, p21) USB Port Monitor LAN Port Port (p32) Battery (p66) USB Port 1394 Port PCMCIA Slot (p29) Security Lock Port (p78)
  • Page 18 Bottom Battery Latches Mini-PCI Compartment* Memory Compartment (p73) Compartment (p72) * Wireless communication module(option, p35) is installed in the mini PCI compartment. Getting Started 5...

  • Page 19: Turning The Computer On And Off

    Turning the Computer On and Off To turn on the computer 1. Insert the battery and connect the AC adapter according to the Installation Guide. 2. Slide the LCD latch to the right and open the LCD panel. 3. Press the power button. LCD Latch To turn off the computer 1.
  • Page 20 3. Click Turn Off. If the computer is not turned off properly due to a system error, press <Ctrl>+<Alt>+<Delete>. When [Windows Task Manager] dialogs appears, click Shut Down > Turn Off to turn off the computer. Your unsaved work may be damaged.

  • Page 21: Using The Keyboard

    Using the Keyboard Your computer has an 87/88-key keyboard. By pressing designated key combinations, you can have access to all the key functions of a full-sized keyboard. Function Embedded Numeric Keypad Windows Although the layout of the keys on your computer’s keyboard is different from that on a desktop computer’s keyboard, the keyboard feels like a full-sized keyboard when you use it.

  • Page 22: Using The Numeric Keypad

    To clean the computer keyboard, use slightly damp cotton swabs. Scrub the keys and the surface around the keys. Do not allow liquid to drip into the keyboard or you may damage the keyboard. Using the Numeric Keypad Your keyboard includes a numeric keypad, which is a group of keys that you can set to type numbers and mathematical symbols, such as the plus sign.

  • Page 23: Using Special Function Keys

    Using Special Function Keys The function key activates special functions when it is pressed in combination with another keys. Table 2 shows the special key combinations. Table 2. Description of Special Function Key Combinations <Fn> Key Key Name Combinations <Fn+Esc> Rest <Fn+F2>...

  • Page 24: Using The Touchpad

    Using the Touchpad On Windows, you always see a small graphical image on the screen that indicates the location where you can take the next action. This image is called a pointer, and is usually displayed in arrow shape ( ) or ‘I’...
  • Page 25 You can use various actions with your touchpad as described below. Action Move Click Double-Click Right-Click Drag 12 Users Manual Function Process Move the pointer Place your finger on the touchpad and slide your finger to a destination. Select an object, open a menu, or Place the pointer over an object, execute a button then press left touchpad button...
  • Page 26 Action Function Scroll Display upper/lower/left/right part of the content within a window (Applicable to only some programs) Make sure to use your finger to move the pointer with the touchpad. Do not use any sharpened tool because it may damage your touchpad. Scroll Wheel Use If the scroll wheel does not function properly, install the scroll wheel driver provided on the Software CD.

  • Page 27: Hot Keys

    Hot Keys You may program the four keys to the left of the power button to start any program you have installed on your computer. The default settings for these keys are: Icon Name Internet Key E-Mail Key User Key WLAN/Bluetooth On/Off Key What is Bluetooth?
  • Page 28 To reprogram a hot key 1. Double-click Sens Keyboard icon ( ) on the taskbar. 2. Select a key and click Browse to locate the program you wish to assign to the key. 3. Click on your program choice to select it. Click Open. 4.

  • Page 29: Reading The Status Indicators

    Reading the Status Indicators Status indicators show the status of computer functions. System Top Name Num Lock Caps Lock Scroll Lock HDD Access System Bottom Name Battery Status Power 16 Users Manual Function Changes a portion of the keyboard to a numeric keypad. See ”Using the Numeric Keypad”...

  • Page 30: Introducing Windows

    Introducing Windows Understanding the Desktop The desktop is the working area on the computer. It consists of the large workspace and a taskbar at the bottom. Shortcut Icons Start Menu Start Button Start Button Taskbar Recycle Bin Language Bar Taskbar System Tray withClock Opens the Start menu.

  • Page 31: Understanding The Start Menu

    Understanding the Start Menu The Start menu includes everything that is required to start Windows. From the Start menu it is possible to run a program, open a file, assign system users with Control Panel, receive support by clicking Help and Support, and search desired items from computer of Internet by clicking Search.

  • Page 32: Understanding A Window

    Understanding a Window A window is the basic component in working with the computer. The My Computer window, which is a window for the computer's hard drive, will be used as an example here to show the basic composition of a window. Click Start >...

  • Page 33: Help And Support Center

    Help and Support Center Help and Support Center provides references and troubleshooting information regarding computer use. Click Start > Help and Support. Windows XP Tour You can tour elementary functions provided by Windows XP. Click Start > Tour Windows XP. Or click Start >...

  • Page 34: Using The Computer

    Using the Computer Using the CD Drive You have one of following drives installed on your computer. CD-ROM drive CD-RW drive DVD-ROM drive CD-RW/DVD-ROM Combo drive To insert a CD 1. Press the eject button on right side of the CD drive. 2.
  • Page 35 If you remove the CD when the CD access LED is on, the disk and the data in it may be damaged. Emergency Eject Hole To eject a CD when the CD drive is not working or the computer is turned off, unfold a paper clip, and insert the unfolded end of the clip into the emergency eject hole and press until the CD tray opens.

  • Page 36: To Play A Video Cd

    Windows Media Player tour For more information about using the Windows Media Player, run the Windows Media Player and click Help > Help Topics > Windows Media Player tour. To play a video CD If a video CD does not run automatically, follow these steps. 1.
  • Page 37 To write data on a CD (Option) If your computer has writable CD drive, you can copy data to a blank CD or create an audio CD. Additional CD writing program is supplied in an additional CD. For information about use, refer to the supplied manual. You cannot write on a CD that already has data in it.
  • Page 38 5. Click Write these files to CD in the CD drive window. 6. When the CD Writing Wizard appears, enter the CD label, and click Next. The data begins copying. 7. When copying is completed, a message ‘completed’ appears and the CD drive window opens automatically.
  • Page 39 Enjoying Home Theater (S/PDIF Port) Your computer supports 5.1 channel output, which is a basic function for home theater systems, and DVD drives. It provides 3D surrounding sound and vivid screen. What is a home theater system? Home theater system usually consists of a TV, DVD, 5.1 channel speaker, and digital amp and provides a high-resolution screen (MPEG2) and 3D surrounding sound (Dolby 5.1 or DTS).
  • Page 40 Step 1. Connect digital amp, speakers, and TV to the computer 1. Connect a digital amp to the S/PDIF port of your computer. 2. Connect speakers to the digital amp. Digital Amplifier Front Left Speaker Surround Left Speaker To watch through a TV Connect the TV and change the setting in the Display Properties to TV.
  • Page 41 Step 3. Enable S/PDIF on the DVD program To use 5.1 channel speakers, you need to install the Power DVD program from the DVD Installation CD provided with your computer, then change the settings as following procedure. 1. Run Power DVD program and click the Settings icon ( 2.

  • Page 42: Using The Pcmcia Card Slot

    Using the PCMCIA Card Slot Various different functions can be added by inserting PCMCIA cards into the system. This system supports 16/32 bit, type I or II PCMCIA card types. The PCMCIA card slot does not support a ZV card or a PCMCIA III card. To insert a PCMCIA card Before using the PCMCIA slot, remove the slot protector.
  • Page 43 Using the Memory Stick Slot In recent, Memory Stick is popular as a removable storage device like floppy diskette. It is widely used for many digital products like digital camera, PDA, etc. Users can easily install a memory stick to save and remove data in it. Memory stick slot is optional when purchasing a computer.

  • Page 44: Connecting To The Internet

    Connecting to the Internet Connecting with a Modem Before Start: • Prepare a telephone line that is not digital. • Contact an internet service provider (ISP) for instructions on how to connect to and disconnect from the Internet, and fees. 1.
  • Page 45 Connecting Through a Wired LAN 1. Connect a LAN cable to the computer’s LAN port. 2. Click Start > Control Panel. 3. Click Network and Internet Connections in the [Control Panel] window. 4. Click Network Connections in the [Network and Internet Connections] window. 5.
  • Page 46 6. On the General tab, select “Internet Protocol(TCP/IP)” and click Properties. 7. To use DHCP: On the General tab, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click OK. To use a static IP: On the General tab, select “Use the following IP address” and fill in the IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternative DNS server fields.

  • Page 47: Wake On Lan Function

    Wake On LAN Function <Wake On LAN> is a function that activates the system in rest mode when a signal (such as ping or magic packet commands) arrives from network(wired LAN). To use <Wake On LAN> function: 1. Click Start > My Computer > My Network Places > View network connections.
  • Page 48 Connecting Through a Wireless LAN (Option) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. Using the wireless network connections between the systems, you can use normal network functions such as sharing of files, folders and printers.

  • Page 49: Connecting To An Access Point (Ap)

    networks, you can access the Internet through a computer that is connected to the Internet even if your computer is not directly connected to the Internet. For details, see “Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 37. Connecting to an Access Point (AP) This section describes how to connect to an AP.
  • Page 50 If the network key is not configured for the desired AP, select 'Allow me to connect to the selected wireless network, even though it is not secure’. Now you are connected to the AP, and you can access the network. Checking the connection status Move the mouse pointer over the Wireless Network Connection ( the taskbar, and the connection status is displayed.
  • Page 51 Step 1. Setting up a computer-to-computer network 1. Right-click on the Wireless Network Connection ( select View Available Wireless Networks. 2. Click Advanced. 3. On the Wireless Network tab, click Advanced. 4. Clear 'Automatically connect to non-default network' check box, if it is selected. Select 'Computer-to-computer (ad hoc) networks only', and click Close.
  • Page 52 6. Enter the network name (e.g. samsung), and unselect 'The key is provided for me automatically'. Enter the encryption key in the Network key field, and click OK. To prevent a network connection from an unauthorized user, it would be better to configure a network key (encryption key).
  • Page 53 7. Check that the configured network name (e.g. samsung) is in the ’Preferred networks’ item, and click OK. Now your wireless network setup has been completed. Step 2. Connecting to the configured computer 1. Right-click on the Wireless Network Connection ( select View Available Wireless Networks.
  • Page 54 If the network key is not configured in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 37, select 'Allow me to connect to the selected wireless network, even though it is not secure'. The two computers are connected and are able to communicate with each other. When the computers are connected, the 'Wireless Network Connection' message is displayed for a short time over the Wireless Network Connection icon of the two computers.
  • Page 55 Using Wireless Networks in Other Operating Systems In a operating system other than Windows XP, you have to install additional wireless LAN configuration program, and configure wireless network settings. To use wireless network connection, complete the following procedures. • Step1. Install the wireless LAN configuration program (PROSet). •...
  • Page 56 To connect to an Access Point: To connect to an access point or existing computer-to-computer (Ad Hoc) network, refer to the following procedures. (To create a new computer-to-computer network, refer to the following "To create computer-to-computer (Ad Hoc) network" section.) 1.
  • Page 57 - Data encryption (WEP): IEEE 802.11 WEP (Wired Equivalent Privacy) standard has two security levels of 64-bit key (40-bit key for some cases) and 128-bit key. - Key index: Select the current encryption key index used by the access point out of 1 to 4.
  • Page 58 3. Configure password setting to be used for computer-to-computer network connection in the Security Settings window. To connect to an access point, enter the network authentication, data encryption (WEP), key index, and password configured in the access point. It is recommended to configure data encryption for security purposes when creating a computer-to-computer network connection profile.

  • Page 59: Using Network Services

    Using Network Services While the computer is connected to the network, you can use network services to share files, folders, and printers. Using computer-to-computer wireless networks, you can access the Internet through a computer that is connected to the Internet even if your computer is not directly connected to the Internet.
  • Page 60 Step 1. Configuring Sharing 1. Right-click the target file or folder to share in My Computer, and select Sharing and Security. 2. Click 'IF you understand the security risks but want to share files without running the wizard, click here'. It has the same security effect as that of the 'Network Setup Wizard'.

  • Page 61: Sharing Printers

    Step 2. Using Shared Files or Folders This section describes how to access shared files or folders if your computer is a member of the same workgroup. 1. Click Start > My Computer. Under Other Places, click My Network Places in your computer.
  • Page 62 Step 1. Configuring Printer Sharing 1. From the computer connected to the printer, click Start > Printers and Faxes. 2. Right-click the printer you want to share, and click Sharing. 3. Select 'Share this printer', enter a share name for the shared printer, and click OK. 4.
  • Page 63 5. Select 'Browse for a printer', and click Next. 6. Select the workgroup or computer, select the desired printer, and click Next. If you cannot find the desired printer, try again after a while. 7. Read the warning about a shared printer, and click Yes to install the shared printer. 8.

  • Page 64: Sharing An Internet Connection

    Sharing an Internet Connection Using computer-to-computer (peer-to-peer) network connections, you can access the Internet through a computer connected to the Internet even if your computer is not directly connected to the Internet. To share an Internet connection, the computers should be connected to a computer-to-computer (peer-to-peer) wireless network.
  • Page 65 If the computer is connected to the Internet through a wired LAN, select 'Local Area Connection'. 3. On the Advanced tab, select 'Allow other network users to connect through this computer's Internet connection', and click OK. Step 2. Checking the Shared Internet Connection. When the Internet connection sharing configuration has been completed, the network icon in the Network Connections window is displayed as follows: Click Start >...

  • Page 66: Customizing Your Computer

    Customizing Your Computer Using System Setup The System Setup (BIOS) program enables you to configure your computer hardware and set security and power-savings options. The settings you choose are stored in battery-maintained CMOS memory that saves the information even when the computer’s power is turned off.

  • Page 67: Starting System Setup

    Starting System Setup To start System Setup, turn on your computer and then press <F2> and hold until the System Setup screen appears. Menu Main Advanced Security Boot Exit To open the menu you need to use, use the left or right arrow keys to select the menu name.

  • Page 68: Changing Booting Priority

    Changing Booting Priority The Boot menu in System Setup enables you to select the booting device and to set booting options. Boot Device Priority field enables: You to select the order in which the computer attempts to boot from different devices. The field has four (4) options: CD-ROM Drive, Removable Devices, Hard Drive and MBA UNDI (Bus2 Slot5).

  • Page 69: Setting The User Password

    Configuring the Password Setting the Supervisor Password By configuring a supervisor password, you can restrict system access to authorized users only. 1. Select the Security menu in the System Setup. To enter System Setup, see “Starting System Setup” on page 54. 2.

  • Page 70: Deactivating The Password

    Activating the Hard Disk Drive Password Activating the hard disk drive password prevents the currently installed hard disk drive from being used in other systems. Before activating the hard disk drive password, the supervisor password must have been configured. On the Set HDD 0 Password item, press <Enter>, and complete step 3-4 of "Setting the Supervisor Password".

  • Page 71: Video Features And Configuration

    Video Features and Configuration Configuring Resolution and Color Depth Screen resolution is the number of pixels displayed on the screen. High resolution makes the overall screen area large, although individual items appear small. Color quality is determined by the number of bits used to represent a pixel on the screen. High color quality displays more number of colors on your screen.

  • Page 72: Adjusting The Screen Brightness

    Adjusting the Screen Brightness There are 8 levels of LCD screen brightness (1:Dimmest~8:Brightest). You can adjust the screen brightness by pressing <Fn>+<Up Arrow> or <Fn>+<Down Arrow> on the keyboard, and the changed screen brightness is displayed on the upper left corner of the screen. The changed brightness setting is maintained after restarting the computer.

  • Page 73: Using External Display Devices

    Using External Display Devices Using external display devices such as monitor, projector, TV, etc you can view the screen images alternatively or simultaneously. You can extend the screen into two display devices to use larger workspace. Using external display devices would be especially useful when you are giving presentation or watching a movie through your TV.
  • Page 74 To switch display devices using shortcut key You can switch display devices easily by pressing <Fn>+<F4 / LCD/CRT> shortcut key. Provided that CRT monitor is connected, the display order will be LCD > CRT > LCD+CRT whenever the <Fn>+<F4 / LCD/CRT> key is pressed. Provided that multiple external display devices are connected, the display order will be LCD >...

  • Page 75: System Management

    System Management Using Power Management Options Your computer includes Power Management options that can help the battery charge last longer and extend the life of the battery. Power-management options will slow down or shut off system components when the components are not being used. Power management may slow down system performance.
  • Page 76 3. Click the Power Schemes tab to display the basic power management options. Power Schemes Tab 4. Select the time that you wish each of the following actions to occur in Battery and AC power mode. • Turn off monitor •...
  • Page 77 If You Reinstall Windows: You should re-establish hibernate in power options by opening Options Properties window and click on the Hibernate tab then click “Enable Hibernation”. Frequent Interruptions: If you experience frequent interruptions, you might also consider putting your computer into automatic hibernation after a specified number of minutes using the power management options.
  • Page 78 Advanced Power Management Schemes This section discusses the advanced power management schemes. There are two buttons that you can use to manually conserve power. To enter the power management window complete the following: 1. Click Start > Control Panel > Performance and Maintenance. 2.

  • Page 79: Using The Battery

    Using the Battery Your computer uses a smart rechargeable Lithium-ion (Li-ion) battery pack for power when the AC adapter is not attached to an electrical outlet. The smart battery gives a accurate measurement of the current battery capacity which helps extend operating time by enabling effective power management in operating systems that take advantage of the accurate information supplied by the battery.

  • Page 80: Safely Using The Battery

    Safely Using the Battery Follow these guidelines to safely use the battery: • Turn off your computer and unplug it if you accidentally: – Expose the equipment to liquid. – Drop, jar, or damage the computer. • Use only approved battery chargers. •...

  • Page 81: Removing The Battery

    2. Insert the battery into the battery compartment until the battery latch snaps into place. Left Battery Latch 3. Slide the left battery latch toward center to lock the battery in place. Removing the Battery Your computer comes with the battery pack inserted in the computer. To remove the battery from the computer: 1.

  • Page 82: Monitoring The Battery Charge

    Monitoring the Battery Charge Battery life is affected by factors such as the power-management settings in System Setup, the applications you use, and the brightness settings of the LCD. Under normal usage, the battery charge lasts approximately 2 hours. Battery life estimates are subject to variation. The actual life of your battery may be less than the estimates given in the manual.

  • Page 83: Battery Gauge

    Battery Gauge You may display the battery gauge while you are in any program by pressing <Fn+F2>. The battery gauge is only displayed for a few seconds. When using this function, the LCD display may not operate properly. Power Source: Indicates that the computer is powered by the AC adapter.

  • Page 84: Battery Warnings

    Then try charging the battery again. • The battery may be defective, please try running your system from the AC adaptor with the battery removed from the system. Please contact the Samsung helpline if you are unsure. Battery Calibration Calibrating your battery once a month is one of the recommended methods of increasing your computer’s battery life.

  • Page 85: Using The Hard Drive

    Using the Hard Drive Your computer includes a removable IDE (integrated drive electronics) hard drive. The IDE hard drive can store the data and programs your computer uses. The drive plugs into a connector on the system board. The hard drive that comes with your computer has already been formatted. Do not format the hard drive.

  • Page 86: Memory Modules

    You can increase system memory by installing optional memory modules. To avoid possible system problems, use only approved memory modules in your computer. Please consult the appropriate sections of this manual, Samsung Technical Support, or the support Web site (www.samsungpc.com) for additional information. Before You Install Memory To prevent personal injury and damage to the equipment, follow the precautions listed here before installing a memory module.

  • Page 87: Installing A Memory Module

    Installing a Memory Module Handle a memory module carefully. Hold them only by the edges. To install a memory module: 1. Turn the computer over so that the bottom faces up. 2. Using a screwdriver, remove the screw that holds the memory-module compartment door in place.
  • Page 88 5. Align the connector on the memory module with the connector of the slot. 6. Push the memory module into the slot at a slight angle (~30 are fully engaged. 7. Push down on the edge of the memory module until the module snaps into place. 8.

  • Page 89: Using Options

    Using Options You can select these options at purchase: • Wireless communication module (802.11b, bluetooth) • Memory stick slot You can purchse these options separately: • Extra battery pack (3 cell/6 cell) • Battery charger • Ear set The options that are available may change periodically. Contact your reseller for updated information on current and new options.

  • Page 90: Tips For Using Your Computer

    Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer: Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorised manufacturer service center can replace or add any parts inside the chassis.

  • Page 91: Locking Your Computer

    Travelling with Your Computer Air Travel If you are travelling by air, follow these tips: • Take the computer with you as carry-on luggage. Do not check the computer with your baggage. • Allow the computer and disks to go through the X-ray security devices. Do not hand-carry disks through the walk-through metal detectors, which can cause loss of data.

  • Page 92: Handling Spills

    Handling Spills Do not spill anything on your computer. The best way to avoid spills is to avoid eating and drinking around your computer. If you do spill something on your computer, turn off your computer, unplug it immediately, and do the following: •...

  • Page 93: Troubleshooting

    To run Norton AntiVirus proceed as follows: Click Start > All Programs > Norton AntiVirus > Norton AntiVirus 2002. The Norton Antivirus Subscription on your Samsung notebook will expire within 3 months. It is your responsibility to update the virus definitions, and renew subscription with Symantec when the subscription expires.

  • Page 94: Questions And Answers

    Questions and Answers This section provides information on possible problems, solutions and other references for system use. Windows Related Q1 The system does not shutdown properly. When the system does not shutdown normally, press and hold the Power button until the system manually shuts off. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off.

  • Page 95: Display Related

    Display Related Q1 The LCD screen is blank. Adjust the LCD screen brightness. Use the <Fn+Up Arrow>, <Fn+Down Arrow> keys. Q2 The screen saver disturbs screen viewing during Media Player or video file operation. Under the Media Player Options, in Player > Enable Screen Saver During Use, uncheck the box and restart the player.
  • Page 96 Q7 I pressed <Fn>+<F4 / LCD/CRT> keys, then the screen blinks. This problem may occur when you pressed <Fn>+<F4 / LCD/CRT> keys to convert display devices while there is no external display device connected.Connect an external display device first, then convert display devices. Q8 When I played an audio file (Mid/Mp3/Wave) on Windows Media Player, the screen resolution is changed or the screen is not displayed.
  • Page 97 Q11 <Fn>+<F4 / LCD/CRT> keys does not operate. When you are playing video file such as a video CD, an MPEG file, or a DVD, when no external display is connected, or when you are using the extended desktop mode or full screen DOS mode, you cannot change display devices. Q12 When I played a DVD or a video CD in dual display clone or extended desktop mode, actions such as changing the display setting or adjusting the volume operates slowly.
  • Page 98 Q17 When I changed the screen resolution in extended screen mode and restarted the computer, the screen is not displayed properly. This problem may occur when the display is set to "Restart the computer before applying the new display settings". (Start > Control Panel > Appearance and Themes >...

  • Page 99: Modem Related

    Modem Related Q1 I cannot hear the modem sound. Check that the telephone line is properly connected to the modem. Check that the modem driver is installed properly. Click Start > Control Panel > Performance and Maintenance > System. Select Hardware tab > Device Manager > Modems in the System Properties window, and check if there is a yellow exclamation mark on the installed modem icon.
  • Page 100 - Using an AT command As an initialization command, use the command, ATX3. Otherwise, enter the ATX3 command manually before making a call. It can correct this problem by skipping the dial tone check step. - Configuring the Modem through the Control Panel Click Start >...
  • Page 101 Under See Also, click Phone and Modem Options. In the Modems tab, select the installed modem, and click Properties. In the Power Management tab of the Modem Properties window, select the "This device activates the computer in power saving mode" check box, and click OK. The above setting enables the modem to turn on the system and receive a fax when in power saving mode.

  • Page 102: Wireless Lan Related

    Wireless LAN Related Q1 The Wireless LAN device is operating properly, but I cannot connect to the network. This is due to an incorrect configuration, or a configuration error. Check the following check lists: If you are using a computer-to-computer network (peer-to-peer) connection, check that the name of the configured network is correct.
  • Page 103 Even if the network provides DHCP, the server may not allocate an IP address to the client properly, and the client station cannot connect to the network. Referring to A2 of Q1, check that the network key is correct. Q3 I cannot share an Internet connection. It may require some time to synchronize the computers to share an Internet connection after the Internet connection sharing configuration is completed.
  • Page 104 Initialize the device driver. Click Start > Control Panel > Performance and Maintenance > System > Hardware tab > Device Manager > Network adapters, and select the wireless LAN adapter. Right-click the network adaptor and select 'Disable'. Then right- click over the network adaptor and select 'Enable' after a short wait to check that the device is operating properly.
  • Page 105 computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to view the latest search result. Q9 Running Help file while running Profile Wizard in the wireless LAN program (PROSet) makes the PROSet window white. It will be displayed properly when you finish the profile wizard. It dose not affect the program operation.

  • Page 106: Games And Programs Related

    Games and Programs Related Q1 3D game is not executed, or some functions are not working. Change the graphic setting of the game to '2D' or 'Software Renderer', then execute the program again. Q2 I launched a game right after installing it, and the game is not executed. This problem may occur when the game is not compatible with Windows XP.
  • Page 107 Q7 Running speed of a game is too slow or fast. Change the setting of Power Schemes to 'Always On'. (Click Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab, then configure the Power schemes field to 'Always On'.) Q8 Pressing <Fn>+<F2/Gauge>...

  • Page 108: Reinstalling Software

    Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software CD. The drivers and programs included in the system software CD are listed in the D:\ReadMe.htm file.

  • Page 109: Installing Programs

    Installing programs 1. In the initial screen, click Install programs. 2. Click Standard installation in the program installation screen (standard installation is recommended). • Standard installation: Installs and recovers programs to the state of shipment. • User installation: You can select the program installation location, and other options for the program installation.

  • Page 110: Reinstalling Windows Xp

    Reinstalling Window may delete the data on the hard disk drive such as files, programs, etc. In order to minimize damage from data loss, please remember to always back up data. Samsung Electronics is not liable in the case of data loss, please consult your warranty statement for clarification.
  • Page 111 3. The description for the standard installation appears. Click Yes. The installation starts, and the system will be restarted after a while. 4. After the system has restarted, the message ’Press any key to boot from CD’ appears. Do not press any key at this time. After a while the partition configuration screen appears.
  • Page 112 If You Cannot Run Windows If you cannot run Windows, you have to boot the system with the system recovery CD, and reinstall Windows. If you boot the system from the system recovery CD, you can install Windows only with the user installation option. You cannot install with the standard installation option.

  • Page 113: System Specification

    Specifications System Specification The following is the basic hardware specification for the purchased product. Variations may exist depending on the model type. Item Specification Intel PentiumM 1.3~1.7 GHz Cache memory Main memory 128/256/512/1024 MB DDR SDRAM, 2 DDR socket Main Chipset Intel 855GM/ICH4M Hard disk drive (HDD) 2.5’’, UltraDMA 100, S.M.A.R.T 9.5mmH...

  • Page 114: Radio Specifications

    Wireless LAN Specification Product Specification Item Physical Dimensions Specifications operation temperature and humidity Power Specification Power Saving Mode Receiving Mode Transmission Mode Power Network Compatibility Specifications Operating System Media Access Protocol Security Radio Specifications RF Band Support Channels Device Modulation Scheme Standard Output Power Transmission Rate Antenna Type...
  • Page 115 Regulatory Notice for Channel Use in France The number of channels that can be used for wireless LAN differs from country to country. In France however, use only 4 channels (channel 10, 11, 12, 13) when using wireless networks. • Standard: IEEE 802.b •...
  • Page 116 Abbreviations A ..Amperes AC ..Alternating current ACPI ..Advanced Configuration and Power management Interface APM ..Advanced Power Management ATA.
  • Page 117 ISA ..Industry Standard Architecture KB ..Kilobytes kg ..Kilograms LAN..Local-area network lb..
  • Page 118 Glossary AC adapter The AC (or alternating current) adapter regulates current coming into your computer from the wall outlet. The current at the wall outlet is alternating current and needs to be changed by the adapter to DC (direct current) before your computer can use it for power.
  • Page 119 CardBus CardBus technology enables the computer to use 32-bit PC Cards. Hardware in the computer and the Windows operating system provide support for the 32-bit cards. The voltage of 32-bit cards (3.3 volts) is lower than that of 16-bit cards (5 volts).
  • Page 120 Hard drive Also called fixed disk. A hard drive is connected to the computer and can be installed or removed. Data written to a hard drive remains until it is overwritten or corrupted. The 2.5-inch hard drive in your computer was designed for use in a notebook computer.
  • Page 121 PC Card PC Card stands for personal computer card. The Personal Computer Memory Card International Association (PCMCIA) defines the standards used to develop all PC Cards. PC Card types include: modems, Ethernet adapters, SCSI adapters, ATA cards, and memory cards. PC slot The PC slot is the hardware slot in the computer where the PC Card is placed.
  • Page 122 Shadow RAM A write-protected area of RAM that contains a copy of the BIOS. As the computer boots, the BIOS is copied from its permanent location in ROM to RAM. The BIOS can be executed much faster in RAM than in ROM. The BIOS remains in shadow RAM until you turn off the computer.

  • Page 123: Using Windows 2000

    Using Windows 2000 Samsung notebook provides Windows XP or 2000 as operating system depending on the product model. Because the use of Windows XP is similar to Windows 2000, the same User Guide (Online Manual) is used regardless of operating system installed on your notebook.

  • Page 124: Reinstalling Windows 2000

    Introducing Windows Descriptions presented in ”Introducing Windows” (p 17) are applicable only to Windows XP. For Windows 2000, location of menus, shape of icons and some uses may differ from those of Windows XP. To Playback Audio or Video CD Just insert your audio or video CD into your CD drive.

This manual is also suitable for:

Nx05prc001Nx05cp0f2gNx05Nx05prt000Nx05prt001Nx05prt003 ... Show all

Table of Contents