Using Both Dhcp And Static Ip Simultaneously - Samsung NP-R50 User Manual

Using Both DHCP and Static IP Simultaneously

N
N
1. Click Start > Control Panel > Network and Internet Connections >
2. Select the Internet Protocol (TCP/IP) item, and then click Properties.
3. In the Alternate Configuration tab, click User configured, and then enter
4. When the configuration has been completed, click OK.
4-10 Manual
When you are alternatively using networks with either DHCP or static IP address-
ing, you can use alternative settings that enable simultaneous configurations of
DHCP and static IP to use both of the network connections without reconfiguring.
o t e
o t e
This function is provided only when your operating system is Windows XP.
Network Connections > Local Area Connection, press the right button
of the touchpad, and then select Properties.
the appropriate values for the following:
(IP address, Subnet mask, Default gateway, Preferred and alternate DNS server,
Preferred and alternate WINS server)
Now you can connect to both networks using DHCP and static IP respectively.