Cable Connection - Samsung NX10 User Manual

If you use a simple terminal program (i.e. hyper terminal):
Type the "ATX3&W" or "ATX3" command as an initialization command.
MODEM Notes:
1. In order to use the V.90 feature, be sure to check if the standards
2. If you use a PBX phone system, you can not connect using the V.90 mode.
3. Internationally connected calls will be limited to 33.6K (Max.)
Configuring the Wired LAN Connections
You may connect to the network using either a LAN cable or by establishing a wireless
connection if factory option is installed.

Cable Connection

Install the LAN cable by simply plugging the cable into the slot in the left side of the
computer.
Your computer's LAN adapter is ready to use for most situations, however if your
system does not have access to a DHCP server or you wish to personally configure your
LAN connection, proceed as outlined in "Configuring Network Environment" below.
Network Protocols:
You may need to consult your SysAdmin if their network protocols and settings
are required for your LAN environment.
22 Users Manual
supported by the on-line service provider and the modem are identical.
Download speed is limited to 53Kbps. Upload speed is limited to 31.2Kbps.
Speeds can vary by line condition.