Using nView to View Extended Screen
You can expand the screen into two display devices and work conveniently in a wide
workspace.
1. Connect the external display device (e.g. a monitor or a projector) to the
corresponding port of the system. To connect a TV, connect the TV to the TV
output port of the system.
2. Click Start > Control Panel > Appearance and Themes > Display.
3. On the [Display Properties] window, click Settings tab > Advanced > nView tab.
Select the desired item, and click Apply.
nView provides the following three display modes:
•
Standard Mode
The Screen image is displayed only through the primary device, LCD.
•
Duplication Mode
The same screen image is displayed through both the primary device, (the LCD)
and the external display device.
•
Horizontal/Vertical Span Mode
The screen image is spanned to the primary device(the LCD), and the external
display device.
Duplication Mode
Pressing the <Fn+F4 / LCD/CRT> shortcut key combination switches the
display mode between the standard and duplication modes of nView.
Horizontal Span Mode
Using External Display Devices 75
Vertical Span Mode