4
Technical data
Cordless percussion drill
Motor voltage
No-load speed*
Max. torque
Adjustable torque**
Chuck clamping range
Drill diameter max.
Fastening in pine
Tool holder in drill spindle
Weight (incl. additional handle, battery pack BP 18 Li 6,2 AS and chuck) as per EP
TA procedure 01:2014
Weight with Centrotec, without additional handle, without battery pack.
* Speed specifications with fully charged bat
tery pack.
** The maximum speed is reduced in the lower
torque stages (values in clockwise rotation).
5
Functional description
[1-1]
LED light switch
[1-2]
LED lamp
[1-3]
Bit store
[1-4]
On/Off switch
[1-5]
Clamping sleeve
[1-6]
Drilling/impact drilling selector
switch
[1-7]
Gear switch
[1-8]
Torque thumbwheel
[1-9]
Right/left switch
[1-10] Belt clip
[1-11] Button for releasing the battery pack
Soft material (wood)
Hard material (metal)
[1-12] Insulated gripping surfaces (grey
shaded area)
[1-13] Capacity display button on battery
pack
[1-14] Capacity indicator
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin
ning of the Operating Instructions.
6
Commissioning
6.1
Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack [2 B]
The battery pack is ready to use straight out of
the box and can be charged at any time.
6.2
Light and battery capacity indicator
The LED on the lamp [1-2] is both a light
and a battery capacity indicator .
► Press the LED light switch [1-1]:
English
PDC 18/4
18 V
1st gear
0 - 400 rpm
2nd gear
0 - 850 rpm
3rd gear
0 - 1850 rpm
4th gear
0 - 3800 rpm
40 Nm
60 Nm
1st gear 1.2 - 11.5 Nm
2nd gear
0.8 - 7.2 Nm
3rd gear
0.6 - 4.7 Nm
4th gear
0.6 - 2.6 Nm
1.5 - 13 mm
Wood
50 mm
Metal
13 mm
max. ∅
10 mm
1/4"
2.4 kg
1.3 kg
15