Kerbl 296200 Instructions For Use Manual page 25

6.1 Delivery condition
The device is delivered as standard as follows.
A Stainless steel pressure vessel with wheels
B Handle - screwable (not fitted)
C Filling sieve (fitted)
D1 Filling funnel (fitted)
D2 Flat gasket (fitted)
D3 Closure ball (fitted)
E Exhaust – 1/4" ball valve
F Cross manifold block with pressure gauge (fitted)
G 5 bar safety valve (fitted)
H NW 7.2 connection nipple with check valve (fitted)
I Removal ball valve (fitted)
J 1" cleaning cap with seal
K 10 m whitewash extension hose (included)
L 7-piece spray fitting, complete (included)
M Instructions for use (included, not shown)
K
25
L