Advertisement
Available languages
Available languages
Medium
Diluted whitewash
(calcium hydroxide solution)
Disinfectants
Hoof care products
Corrosion protection
Active cleaners
Nozzle table for flat jet nozzles:
ø
Nozzle inserts
mm
0.2
0.91
0.3
1.10
0.4
1.30
0.6
1.60
WARNING!
3. Misuse
3.1 Foreseeable misuse
The device is not suitable for:
• Explosive, highly flammable or combustible liquids with a flash point of below +60 °C.
• Oxidising and toxic media.
• Sodium / potassium hydroxide (alkali hydroxide), formic / acetic / hydrochloric / sulphuric / hydrofluoric / nitric acid, ammonia, chlorine,
peroxide and other corrosive media.
• Media containing solvents
• Fuels
• Wetting agents (tensides) that cause or encourage crack formation on the plastics used.
• Viscous, sticky or residue-forming fluids that cannot be removed or rinsed fully out of the device.
• The spraying of pesticides and plant protection products.
• Use in the food sector.
3.2 Conversions or modifications
Unauthorised modifications to the device or improper use exclude any liability of the manufacturer for any resulting damage.
Recommended nozzle:
• Round jet nozzle diam. 1.5 mm (included in scope of delivery).
• Flat jet nozzle 0.6 mm (included in scope of delivery).
Recommended application pressure: 2-3 bar (depending on the viscosity of the fluid)
Notes on use:
• Only apply whitewash to dry masonry.
This improves adhesion.
• Do not apply whitewash in direct sunlight.
Whitewash dries out too quickly and adhesion is reduced.
Recommended nozzle:
• Flat jet nozzle 0.2 - 0.3 - 0.4 (order number: 296024)
Recommended application pressure: 2-3 bar (depending on the viscosity of the fluid)
Examples:
• Rhodasept stable disinfectant
• ClawPlus hoof care product
• WD-40
• SONAX AGRAR active cleaner
0.5
0.7
1
0.31
0.38
0.45
0.48
0.55
0.68
0.64
0.75
0.90
0.96
1.10
1.40
22
Notes
Flow rate in l/min
Pressure in bar
1.5
2
3
0.55
0.64
0.78
0.85
0.96
1.20
1.10
1.30
1.60
1.60
1.90
2.30
4
5
0.90
1.00
1.36
1.50
1.80
2.00
2.80
3.00
Advertisement
