Kerbl 296200 Instructions For Use Manual page 21

1. General information about the instructions for use
These instructions for use are an intrinsic part of the device and must always be kept available at or near the device. The instructions for use
provide you with important information on how to use the device safely! Keep these instructions for use in a safe place and hand them on to any
future owners. All warning information is intended also for your personal safety.
1.1 Symbols on the device and in the instructions for use
The instructions for use must
be read in full by every person
responsible for the operation, use
or maintenance of the device.
Eating, drinking and smoking is
only permitted after removing the
protective clothing and carefully
cleaning your hands and face.
Observe the safety data sheet of
the spray medium used and wear
suitable protective clothing.
1.2 Warning instructions
WARNING!
CAUTION!
IMPORTANT!
Note all of the information included in the instructions for use.
2. Correct use
This device is a universal sprayer and is used exclusively to apply the fluids and materials below. Adherence to the enclosed instructions for use is
essential for the proper use of the device.
CAUTION!
Improper use of the device can result in dangers. Pay attention to the following safety instructions:
• Use the device only as intended.
• Observe all of the notes and information included in the instructions for use.
IMPORTANT!
Read the safety data sheet first before using any spray agent.
This warning indicator points out an immediate danger that can lead to death or serious physical injury.
This warning indicator points out hazardous situations that can lead to injuries.
This warning indicator points out hazardous situations that can lead to injuries or malfunctions. Follow
the instructions in order to avoid material damage to the device.
21
Protect the device from prolonged
exposure to direct sunlight and
frost.
Never point the spray jet at
people or animals.
Do not spray explosive, highly
flammable or combustible liquids
with a flash point below +60°C.
Do not spray oxidising or toxic
materials.