Brother DCP-T220 User Manual page 20

Home > Paper Handling
2L Paper in the Paper Tray
Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the paper size setting on your computer.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Lift the output paper tray cover (1).
4. Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size.
1
2
5. Fan the stack of paper well to avoid paper jams and misfeeds.
> Load Paper > Load Paper in the Paper Tray
1
2
1
> Load Cut-Sheet Paper or Photo
16