Table of Contents
Advertisement
7. Type the partition size in the blank of 'Enter partition size in Mbytes or percent
of disk space (%) to create a Primary DOS Partition...:[ ]' and press Enter.
(HDD size) - (Save-To-Disk Partition + 5MB)
Eg.) Partition size for 6.4 GB HDD = 6250 - (140 + 5) = 6105
8. Finish the Fdisk by <Esc> key and press the power button to reboot the system.
To create PHDISK
1. Set the system boot with CD-ROM, press <F8> key to boot with "Command
prompt only".
2. Operate Phdisk.exe as follows.
3. Type 'E:\sysutil>phdisk /c 143360 /p' and press Enter.
143360 is calculated as below formula, and it could be different according to
system memory.
143360={system memory(64MB) + video memory(8MB) + extended
memory(64MB) + buffer space(1MB)}x1024
4. Press any key to restart the system.
To format the HDD
1. Boot system by CD-ROM.
2. Operate Format.exe, type 'A:/format c: /s' and press Enter.
3. Warning message saying all the data will be removed shows, type Y for
'Proceed with Format (Y/N)?' and press Enter.
4. Type the drive label and press Enter.
To install Windows and each device drivers
Use System Recovery CD to install OS and System Software CD to install devices'
drivers.
82 Creating a Save to Disk Partition
Advertisement
Table of Contents
