Samsung N860 User Manual page 48

Installing Modem Driver in Windows NT 4.0
(Modem Module Driver)
You can install the modem driver as shown in the following.
If your modem driver is already installed, you must remove the existing mode
driver first. Remove the driver by selecting SENS PT56MDW Modem at Add/
Remove programs of Control panel.
Install the Modem Driver
1. Insert the CD or floppy diskette that has the modem driver on it.
2. Click the Start button, and then click Run. Locate the directory that contain
the modem driver and run Setup.exe. ('D' refers to the CD-ROM driver.)
"D:\NT4\Driver\Modemonly\Setup.exe"
3. Click the Next button when the Setup Wizard dialog appears.
4. Click the Next button when the dialo for Resource Settings appears
5. Select current country and click OK button when the Country Selection dialog
appears.
6. Click finish button when the modem driver is inserted successfully. In order to
complete the driver installation, you must restart the system.
Modem driver installation confirmation
After the modem driver is installed, you can check if the modem driver is installed
properly.
1. Click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Modem icon.
48 Using the Modem
The figures illustrated in this manual may not be identical as
those on you system. The figures in this manual were
developed using the SENS PT56MDW Modem installation as
a reference.
At the BIOS setup, Installed OS must be set as 'Other/NT4.0'.
When you install the driver or remove the driver, you must log
in as Administrator.