Using The Flex-Bay; To Remove A Device From The Flex-Bay - Samsung N860 User Manual

Using the Flex-Bay

Your computer includes the Flex-Bay, a peripheral bay that can hold one of the
following devices:
CD-ROM drive: shippped with some computers and also available as an
option.
DVD-ROM: shippped with some computers and also available as an option.
Optional secondary hard drive: available as an option for your computer.
Superdisk LS-120: available as an option for your computer.

To remove a device from the Flex-Bay

1. Turn the computer's power off.
2. Close the LCD panel, and turn the computer over so that the bottom of the unit
faces up.
3. Pull up on the Flex-Bay latch and pull the device from the bay.(Figure 13)
Flex-Bay latch
4. Remove the device out of the bay.
If your operating system is Windows 98/ Me, you can use the
SwapBay Utility to hot-swap the devices. If you do not use
Windows 98/ Me, make sure that the computer's power is off
before you remove or install any devices.
Figure 13. Removing a Device from the Flex-Bay
Using the Flex-Bay 23