Table of Contents
Advertisement
ATS0?
ATX3
ATX4
ATZ
AT&F
AT&V
AT&W
AT&Zn=xStores the dial string in modem memory (n=0~3, x=phone number)
AT+MS=X Sets protocol for modem connection
58 Using the Modem
times as specified in n value. If the value of n is '0', ATA command
should be entered for auto answer
Displays S0 register value on the terminal
Dials after waiting for specified time
Dials after dial tone is detected
Initializes modem
Loads the factory default configuration (profile)
Shows current configuration
Saves user profile
e.g.) AT&Z0=1235678
Automatically calls the stored phone number by using the following
command.
ATDTS0
Recalls the stored phone number as AT&Z0 by tone
dial
ATDPS0
Recalls the stored phone number as AT&Z0 by pulse
dial
(X=V90, V34)
AT+MS=V90 (default setting)
Try to connect with V.90 (max 56 Kbps)
AT+MS=V34
Try to connect with V.34 (max 33.6 Kbps)
Advertisement
Table of Contents
