Norms And General Warnings; Note For The Users - ASSEMBLAD RPM 111 Operating Manual

ASSEMBLAD RPM 111 = Operating manual

1 NORMS AND GENERAL WARNINGS

The RPM 111 is an RPM counter device for automotive engines, 2 and 4 strokes from 1 to
20 cylinders.
Please read carefully this manual before operating on the equipment and follow the
instructions when doing any action on it, in particular when doing maintenance
procedures.
Open the equipment only when explicitly indicated. Then, at the end of operations, close it
restoring its original conditions, in particular the casing and the gasket, before switching on
it again.
The manufacturer disclaims any responsibility for any kind of event arising from a
improper use of the equipment or for a procedure not explicitly described on this manual.
In any case, the responsibility is limited to the repair of the instrument.
For more detailed information please read the chapter "Warranty".
The equipment performs measures in conformity with the Italian Ministerial Decree of law
n. 628 of 23/10/1996 and following modifications as Circular n. 88/95 of 06/09/1999

1.1 NOTE FOR THE USERS

The symbol of a "crossed" urban trash-bin is stamped on the equipment or on
its box and it means that the product must be disposed into the appropriate collecting
facility at the end of its life.
The disposal of the equipment will be managed by the producer. The user shall contact
the producer and follow the method that has been implemented for collecting the
appliance at the end of its life.
A correct waste disposal of the appliance and its subsequent treatment contributes to
avoid serious environmental and health damages and allow the recycling of materials
used into the equipment.
An incorrect waste disposal of the product is subject to administrative sanctions.
In accordance with art. 13 – D.L. 25 July 2005 – n. 151 for the Actuation of European Directives 2002/95/CE, 2002/96/CE and
2003/108/CE, related to reduction of dangerous substances in the electric appliance and to the waste disposal (RoHS RAEE).
ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy
3
http:// www.assemblad.it - Mail to: info@assemblad.it