DL2200 and DL3200 Series
Cylindrical Deadbolts
Installation Instructions
4
IC Core Deadbolt Installation
Cylinder
Outside Cylinder
Housing Assy. - SFIC
Housing Collar
a
Install Deadbolt
a. Insert deadbolt unit into hole in door edge, making certain that tab on deadbolt is facing up as shown
in Figure 6.
b. Fasten deadbolt front and deadbolt assembly to door with two (2) deadbolt screws.
c. Extend the deadbolt by turning the slot in the hub. Keep deadbolt extended during installation .
b
Install Outside
a. Position IC driver on cylinder housing as shown, install cylinder into cylinder housing assembly then
remove the key from cylinder. If the plastic disposable temporary core is used, turn the plastic plug so
that the slot is vertical.
b. For 11-function, 13-function, and 17-function lock installation, shorten cylinder tailpiece if necessary
by breaking it off at the score mark with pliers.
c. Insert outside cylinder housing assembly though housing collar onto door with cylinder tailpiece
going through slot in hub of deadbolt.
d. Secure outside cylinder housing assembly mounting plate and support plate to door with two (2)
1/4-20 mounting screws if applicable.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Cylinder Tailpiece
Outside
Cylinder
Housing
Assy. - LFIC
Deadbolt Front
Deadbolt Screw
Deadbolt Assembly
Inside Cylinder
Housing Assy. - SFIC
Before installing cylinder,
position IC driver as shown.
Mounting Plate
Cylinder
Housing
Collar - LFIC
Tab
Turn SFIC
face plate 90˚
to expose
mounting holes
Figure 6
6
Support Plate
Mounting Screw
Thumbturn
Assembly
#8-32
Screw
Mounting
Screw
(DL2200
Series)
Mounting Screw
Inside Cylinder Housing Assy. - LFIC
Mounting Screw
FM331 10/19
Need help?
Do you have a question about the Corbin Russwin DL2200 Series and is the answer not in the manual?
Questions and answers