Heating Calibration; Technical Data - General HT 300 SET Manual

Heating Calibration

Press "Manual" button while the device is off.
SET the temperature difference by pressing "+" and "–" buttons in order to see required temperature. This value can be set between -8
and +8.
Press "Manual" and exit the menu.
Warning: Recommended tempreture calibration is "

Technical Data

Operational Data
Switching Capacity
Voltage
Relay operating voltage
Relay operating current
Differential SD Switching
Required Setting Range
Increments
Battery Life
Environmental conditions
Operation
Climate conditions
Temperature
Moisture
Pollution degree
Transport Storage
Climate conditions class
Temperature
Moisture
Mechanical conditions
Norms and Standards
Standards
Screw Terminals
Color
Receiver
Operating Voltage
Frequency
Relay Operating Voltage
Relay Operating Current
".
DC 3 V (2 × 1,5V AAA Alkaline battery)
3 V (DC)
10 A (SPDT)
o
0.5 C
o
5...30 C
o
0.5 C
1 year (AAA Alkaline Battery)
sınıf 3K5
o
0...+50 C
<95 % r.h.
normal
sınıf2K3/1K3
o
-25...+60 C
<95 % r.h.
sınıf 2M2
CE conrmity
2
2×1.5 mm ya da 1×2.5 mm min.(0.5 mm )
White
230 V+%10/-%15 (AC)
45-65 Hz
12 V (DC)
10 A (SPDT)
2 2