Concept2 KF1310 Manual page 15

EN
UK
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
1. Main part
Main part
1
2. Switch
Switch
2
3. Brush releasing pushbutton
Voltage controller
3
4. Movable flex
Brush releasing pushbutton
4
5. Hanging ring
Detachable grid in inlet
5
6. Round brush
air opening
Movable flex
6
Hanging ring
7
Round brush
8
Thick brush (typ KF 1150)
9
Switch: 0 = off /
conditioning.
Putting the attachment: Simply insert the attachment with the brush into the basic part.
Removing the attachment: Simply pull out the attachment from the basic part.
Releasing the brush: For comfortable use it is not necessary to turn with the brush.
Simply push the pushbutton for releasing brush and the brush becomes movable and
starts rotation. This way easy kinks forming.
Cleaning: The hot-air brush may be cleaned with a piece of wet cloth. The brushes can
be cleaned with a coarse brush and a piece of dry cloth.
Placing: The device can be hung on the wall by the suspension ring.
Disposal:
Packaging:
Cardboard box – sorted paper waste disposal
PE bag – sorted PE waste disposal
Polystyrene pads – sorted PS waste disposal
Product:
Plastic materials – sorted disposal of plastic materials
Cable without the plug – sorted copper waste disposal
Metallic parts, electronics – iron scrap
10
KF1310
5
4
= cold air / 1 = lukewarm air / 2 = strong and warm air for fast
6
2
1
9
4 2 3
8
KF 1130, 1140, 1150
6
7
3
5
14