Arrangement - Hitachi CP-WU9100 User Manual

Arrangement

Refer to tables T-1 to T-2 at the back of this manual as well as the following to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
WARNING ►Install the projector where you can access the power outlet easily.
►Install the projector in a stable horizontal position.
• Do not use any mounting accessories except the accessories specifi ed by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand. Specifi c mounting accessories and services may be required.
• Do not set the projector on the terminal side, rear end, or front.
• Do not attach nor place anything on the projector unless otherwise specifi ed
in the manual.
►Do not install the projector near thermally conductive or fl ammable things.
►Do not place the projector where any oils, such as cooking or machine oil, are used.
►Do not place the projector in a place where it may get wet.
• DLP chip(s) is/are precision-made parts. In rare cases, pixels may be missing
or lit, but this is not a malfunction.
• Direct high-power laser beam onto the lens surface can damage the DLP
chip(s).
CAUTION ►Place the projector in a cool place with suffi cient ventilation.
• Keep a space of 50 cm or more between the projector and other objects such
as walls.
• Do not stop up, block nor cover the projector's vent holes.
• Do not place the projector at places that are exposed to magnetic fi elds, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector near humidifi ers.
NOTICE ►Position the projector to prevent light from directly hitting the
projector's remote sensor.
►Do not place the projector in a place where radio interference may be caused.
►Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is
recommended to leave it at AUTO usually. If the projector is used with a wrong
setting, it may cause damage to the projector itself or the parts inside.
6
Projector top
Projector bottom
Ⓗ × Ⓥ : Screen size
ⓐ : Projection distance
(from the front of the projector
unit)
ⓑ , ⓒ : Screen height