Hitachi CP-WU9100 User Manual page 16

4.
Loosen the three screws (marked by arrow) of the lamp, and slowly pull the
lamp out by the handles. Never loosen any other screws.
4, 5
LAMP2 UNIT
(on the left side)
Handles
5.
Insert the new lamp, and firmly retighten the three screws of the lamp
loosened in the previous process to lock it in place.
6.
While putting the interlocking parts of the lamp cover and the projector
together, slide the lamp cover back in place. Firmly fasten the screw of the
lamp cover.
7.
Turn the projector on and reset the lamp time using the LAMP TIME item in
the SETUP menu.
(1) Press the MENU button to display a menu.
(2) Select as the following using the cursor button.
EASY MENU > ADVANCED MENU > SETUP > LAMP & FILTER
(3) Select LAMP-1 TIME or LAMP-2 TIME.
(4) Press the button to select "OK" on the dialog. The lamp time is reset.
►
CAUTION ►Do not touch the interior of the projector, while the lamp is
taken out.
NOTE • Reset the lamp time only when you have replaced the lamp, for a
suitable indication about the lamp.
Lamp cover is assembled with cooling fan, handle with care.
16
Handles
LAMP1 UNIT
(in the middle)