Displaying The Picture - Hitachi CP-WU9100 User Manual

Displaying the picture

1.
Activate your signal source. Turn the signal source on, and make it send the
signal to the projector.
2.
Press the INPUT button on the projector.
Each time you press the button, the projector switches its input port in turn.
You can also use the remote control to select an input signal.
Select from the buttons for input ports as the following.
COMPUTER IN, HDMI 1 / 2, DVI-D, HDBaseT™, SDI/DIGITAL 1, VIDEO,
LAN
(continued on next page)
12
INPUT button
Buttons for input ports