Advertisement
Mount the top handle to the Cage as
shown in the photo, tighten the knob to
secure.
NOTE: You can mount handle at different
positions – front / back / side. To do this,
loosen the screw with the help of screw driver
and set the position as per your requirement,
make sure to properly secure it.
Wrap the Flexible gear ring around the
lens, cut to size (if needed) and tighten the
gear properly. Then attach the follow focus
onto the rails and align it with the gear
ring. Tighten the knob to secure properly.
Now attach the matte box to the front of
rods, align the knicker with the lens barrel
and tighten the knob.
Now the basic installation is completed, it
is ready for shooting. You can add other
accessories to this kit according to your
requirement.
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time,
we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection
and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our
utmost support and care until you use our product.
4
Advertisement
