Filmcity FC-A6360-CHRS Instruction Manual

Dslm camera cage with top handle & rod support

FILMCITY DSLM Camera Cage with top handle & Rod Support

DSLM Camera Cage with Top Handle

& Rod Support

(FC-A6360-CHRS )

I N S T R U C T I O N M A N U A L

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by

the applicable copyright statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the FC-A6360-CHRS and is the answer not in the manual?

Page 2 FILMCITY DSLM Camera Cage with top handle & Rod Support INTRODUCTION Sony alpha A6000 A6300 ILCE-6000 6300 NEX-7 perfectly fits into cage with 1/4" screw. It allows you easy access to all the vital control buttons of the camera. There is exactly perfect spacing for the lens and prevent a6300 from overheating.
Page 3 FILMCITY DSLM Camera Cage with top handle & Rod Support  Slide-in the rod adapter into the sliding plate and lock it with the help of knob as shown.  Insert 300mm female threaded rods into the rod adapter and tighten the knob.
Page 4 FILMCITY DSLM Camera Cage with top handle & Rod Support  Attach quick release plate of rod adapter with the cage and tighten it with the help of screw-driver. Then slide it into the rod adapter and tighten with knob to secure.
Page 5 FILMCITY DSLM Camera Cage with top handle & Rod Support Note: The direction of the handle can be adjusted. Loosen the screw with the help of screw driver to adjust the direction of handle or to mount it sideways. YOUR FILMCITY DSLM CAMERA CAGE WITH TOP HANDLE & ROD...
Page 6 FILMCITY DSLM Camera Cage with top handle & Rod Support The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or service by anyone other than our company.