Advertisement
Camera Cage Setup
Attach the quick release plate of your
tripod head with sliding base plate and
tighten it with the help of screw driver.
Now mount the sliding base plate on fluid
head and secure it properly with the help
of knob.
Slide-in the rod adapter into the sliding
plate and lock it.
Now, put the camera into the cage, and
secure it properly with ¼"-20 locking
screw.
Put the quick release plate onto the cage
and tighten it with locking screw. Then
mount the cage onto the rod adapter, and
make sure the knob is securely fastened.
Insert two 15mm rods into the Rod adapter,
and tighten the Knobs on both sides of the
Rod adapter.
NOTE: You can attach the 150mm male rods
at the front to extend the rods for mounting
your matte box, follow focus and handles etc.
3
Advertisement
