Advertisement
Matte Box Setup
Insert french flag to the top of Matte Box
and tighten it with screws. In the same
way, insert side flags into the slots
provided on both sides and secure them
with screws.
NOTE: If the french flag remains loose even
after tightening the knob, then slightly
tighten the allen bolt as shown.
Now wrap Knicker on the conversion ring
of Matte Box.
You can easily insert the filter holders as
shown in the image. The Filter tray can be
rotated 180 degree.
The
aluminum made
attaches matte box to the 15mm rods. Set
the matte box at any position on the rods
by loosening the knob and sliding along the
rails, re-tighten to secure.
The Front Adapter also features height
adjustment
up
to
compatibility of Matte box to adapt different
camera lenses.
Front Adapter
2.5cm
increasing
2
Advertisement
