Hyundai 2020 SANTA FE Manual page 66

TMa CAN-E 2.qxp 2/1/2019
Securing a child restraint seat
with "Tether Anchor" system
First secure the child restraint with
the LATCH lower anchors or the seat
belt. If the child restraint manufactur-
er recommends that the top tether
strap be attached, attach and tighten
the top tether strap to the top tether
strap anchor.
Child restraint hook holders are
located on the rear of the seatbacks.
4:14 PM Page 45
Take the following precautions
when installing the tether strap:
•
Read and follow all installation
instructions provided with
your child restraint system.
•
NEVER attach more than one
child restraint to a single teth-
er anchor. This could cause
the anchor or attachment to
come loose or break.
•
Do not attach the tether strap
OTMA038032
to anything other than the cor-
rect tether anchor. It may not
work properly if attached to
something else.
•
Do not use the tether anchors
for adult seat belts or harness-
es, or for attaching other items
or equipment to the vehicle.
WARNING
To install the tether anchor:
1. Route the child restraint tether
2. Connect the tether strap hook to
3. Check that the child restraint is
OTM038047
strap over the child restraint seat-
back. Route the tether strap under
the head restraint and between
the head restraint posts, or route
the tether strap over the top of the
vehicle seatback. Make sure the
strap is not twisted.
the tether anchor, then tighten the
tether strap according to the child
seat manufacturer's instructions to
firmly secure the child restraint to
the seat.
securely attached to the seat by
pushing and pulling the seat for-
ward-and-back and side-to-side.
2
2-45