Transport; Setting At Work Setup - vimec ROBY T09 Use And Maintenance

FIG. 8
R Max 20 mm

6) TRANSPORT

6.1) Handling
The transport of the dismantled unit can be manual
for short passages or for load/unload operations. The
chassis shall be transported by using the handles on
the extremities (Fig. 9\a and b).
Chassis weight complete of battery:
- kg 37
Steering-bar weight:
- kg 10
For ergonomic reasons, the manual lifting of the
chassis needs always two persons.
6.2) In case of no utilization
- Place the machine in a dry room.
- Protect possibly the machine from dust by covering
it.
- Never leave the machine weathered.
6.3) Position of the center of mass (Fig. 10\a)
It is considered in lock position between the steering-
bar and the chassis.

7) SETTING AT WORK SETUP

7.1) Preliminary phases of the installation
Before carrying out the installation, read the ma-
nual carefully.
Package opening
- Cut the protective film by using a knife. Do not break
and warm the package.
- Take care of not scratching the surfaces of the unit.
- Scour the unit taking away every residual package
and dust.
a
Max 35°
FIG. 9
FIG. 10
7.2) Elimination of package material
For the collection and the elimination of residual packa-
ge apply to an authorised company.

7502048
a
b
a