Appendix C Plastic Door Template - Assa Abloy Corbin Russwin FE5400S Series Installation Instructions Manual

Appendix C - Plastic Template
A plastic template has been provided with the exit
device that can be used to accurately mark the vertical
centerline that will be used to locate the vertical rods,
top and bottom latches and the rim device to the door.
For single door installations use the block strike and
plastic template as shown to accurately mark the
vertical centerline.
For double door installations remove the block strike
and use only the plastic template.
Block Strike (single door applications only)
After marking the vertical centerline swing the door to
the closed position and visually check to assure that
the vertical centerline of the rods, latches & strikes will
align with the center of the cut out for the top latch in
the frame.
Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company.
14 of 14 All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Plastic Template
ASSA ABLOY
Centerline Rods,
Latches & Strikes
Centerline of 11/16" diameter hole
for the device cam hub.
®
Horizontal
Centerline
for Device
and Strike
FM329 (11/18)