Fluke FiberInspector Micro User Manual page 6

Settings
Refer to Figure 4.

Display and probe software versions: If a software update is available, you
can download it from the Fluke Networks website. See "Upgrade the
Software".

Power Down: The display turns off after the selected period of inactivity.

Standby: The display goes into low-power mode after the selected period
of inactivity.

Dim Display: The display dims after the selected period of inactivity.

Probe Light: The probe light stays on for the selected time.

Brightness: Changes the brightness of the display. Keeping the display at
less than 100% brightness increases the battery life.

Dimmed Brightness: Changes the brightness of the display when the
display is dim.

Auto Focus

On: Press
automatically. The display will also focus the image automatically when
you press

Off: Press

Save and Exit: Saves the settings and exits the settings menu.
6

on the probe or

on the probe or
to focus the image manually.
Select a setting
Figure 4. Settings
on the display to focus the image
on the display.
Change the setting

AM02.EPS