Specifications - Fluke FiberInspector Micro User Manual

Specifications

General Specifications
Operating: 32 °F to 122 °F (0 °C to +50 °C)
Temperature
Storage: -22 °F to +140 °F (-30 °C to +60 °C)
range*
Operating: 0 % to 95 % (32 °F to 95 °F, 0 °C to 35 °C)
Humidity
RH non-condensing
range
Storage: 0 % to 95 % (95 °F to 113 °F, 35 °C to 45 °C)
RH non-condensing
Operating: 4,000 meters; Storage: 12,000 meters
Altitude
2 g, 5 Hz to 500 Hz
Vibration
1 meter drop test
Shock
IEC 61010-1: Pollution Degree 2
Safety
IEC 61326-1: Controlled Electromagnetic Environment; IEC 61326-2-1
EMC
CISPR 11: Group 2, Class A
Group 2: Equipment contains ISM RF equipment in which radio-
frequency energy in the frequency range 9 kHz to 400 GHz is
intentionally generated and used or only used, in the form of
electromagnetic radiation, inductive and/or capacitive coupling, for
the treatment of material or inspection/analysis purposes.
Class A: Equipment is suitable for use in all establishments other than
domestic and those directly connected to a low voltage power supply
network which supplies buildings used for domestic purposes. There
may be potential difficulties in ensuring electromagnetic
compatibility in other environments, due to conducted and radiated
disturbances.
USA (FCC): 47 CFR 15 Intentional Radiators: This device complies with
part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation. (15.19). Changes or
modifications not expressly approved by Fluke could void the user's
authority to operate the equipment. (15.21)
Emissions which exceed the levels required by CISPR 11 can occur
when the Product is connected to a test object.
* Without the power adapter. With the power adapter, operating range is 0 °C to
+40 °C and storage range is -20 °C to +60 °C.
12