Table of Contents
Advertisement
Display
Frames per second
Battery type*
Battery life*
Charging time and
temperature
Power adapter
Display
Software upgrades
Input
Dimensions
Weight
* Tested using Gold Peak GH230AAHC batteries. Use only NiMH batteries. Do not use
other types of batteries.
Probe
Camera type
Field of view
Resolution
Light source
Endface
illumination
Port illumination
Power
Output
Dimensions
Weight
12
Rechargeable NiMH, 2 x 1.2 V, 2200 mAh
3 hours of continuous probe use
6 hours of typical probe use
4 hours minimum
50 °F to 113 °F (10 °C to 45 °C)
Input: 100 to 240 VAC ±10%, 50/60Hz
Output: 6 VDC, 3 A maximum
LPS
3.2 inch TFT LCD, 320 x 240
Upgrades can be installed from a USB drive
USB 2.0, Type A
5.5 in x 3.2 in x 1.5 in (14.0 cm x 8.0 cm x 3.9 cm)
9.7 oz (275 g)
5 Megapixel 1/4-inch CMOS sensor
610 μm x 460 μm
1 μm
LED, >100,000 hr life
Coaxial blue LED
2 white LEDs
Supplied through the USB interface
Video output through USB 2.0 interface
4.6 in x 2 in x 0.95 in (117 mm x 51 mm x 23 mm)
(length depends on adapter tip)
4.4 oz (125 g) (with no adapter tip)
13
Advertisement
Table of Contents
