Setting Drc (Dynamic Range Compression); Main Unit - Samsung HT-AS1 Instruction Manual

Setting DRC
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
REMOTE CONTROL
1
2
3
To exit setup mode
•
Using the DRC button
Press DRC button.
Each time you press this button, DRC : STD
•
selected in turn.
24
(Dynamic Range Compression)
√
Press MENU button, and then press ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "DRC SETUP", and
then press ENTER button.
• "DRC:STD" appears on the display.
Press ...† button to set the DRC.
Each time you press this button, DRC : STD DRC : MAX
•
will be selected in turn.
Wait for about 5 seconds or press MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
DRC : MAX
DRC : MIN
DRC : MIN will be

MAIN UNIT

1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press FUNCTION button to select the "DRC SETUP".
3
Press SURROUND MODE button.
"DRC : STD" appears on the display .
•
4
Press SELECT( ) button to set DRC.
,
• Each time you press this button, DRC : STD DRC : MAX
will be selected in turn.
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and the unit Setup Mode is exited.
Setting DRC
• STD : Sets DRC effect to standard.
MAX : Sets DRC effect to maximum.
•
MIN : Sets DRC effect to minimum.
•
GB
DRC : MIN
25