Setting The Speaker Mode - Samsung HT-AS1 Instruction Manual

Setting the Speaker Mode

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration
and whether certain speakers are used or not.
REMOTE CONTROL
1
2
3
4
5
To exit setup mode
•
Using the SPK SELECT button
1 Press SPK SELECT button to select the speaker you want.
•
2 Press
for the selected speaker.
3 Repeat steps 1-2 to set the mode for each speaker.
To turn the SUBWOOFER on or off.
Press SUBWOOFER ON/OFF button on the remote.
• Each time you press this button, SWSPK : YES, SWSPK : NO will be selected
in turn.
To set the cross over.
Press CROSS OVER button, and then press
18
to set the cross over frepuency.
√
Press MENU button, and then press ENTER button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
Press button to select the "SPK SETUP", and then
press ENTER button.
Press button to select the speaker you want.
Each time you press this button, F.SPK C.SPK S.SPK
•
CROVR will be selected in turn.
Press ...† button to set the mode (Large, Small etc.)
for the selected speaker.
Repeat steps 3-4 to set the mode for each speaker.
Wait for about 5 seconds or press MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Each time you press this button, F.SPK C.SPK S.SPK
CROVR SPK MODE OFF will be selected in turn.
...† button to set the mode (Large, Small etc.)
If FRONT is set to LARGE, you can select YES or NO for SWSPK.
•
If FRONT is set to SMALL, SWSPK is automatically set to YES.
•
NO cannot be selected.
...†
SWSPK
SWSPK
Setting the Speaker
SPEAKER
F.SPK(Front)
C.SPK(Centre)
S.SPK(Surround)
SWSPK(Subwoofer)
CROVR
(Crossover Frequency)
button
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "SPK SETUP".
3
Press SURROUND MODE button to select the speaker
you want.
Each time you press this button, F.SPK
•
CROVR will be selected in turn.
4
Press SELECT (
,
for the selected speaker.
5
Repeat steps 3-4 to adjust each speaker.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
Possible Settings Default Setting • LARGE : Select when using large speakers. You can listen to full
range sound.
LARGE,SMALL SMALL
• SMALL : Select this when using small speakers
LARGE,SMALL,NONE SMALL
• NONE : Select when you use no speaker.
LARGE,SMALL,NONE SMALL
• YES (subwoofer) : Select when using the subwoofer speaker.
YES,NO YES
• NO (subwoofer) : Select when not using the subwoofer speaker.
60,80,100,120,
150Hz
• CROVR : Select the crossover frequency for the best bass
150,180,200(Hz)
response in your room.
GB
C.SPK S.SPK SWSPK
) button to set the mode
19