Samsung HT-AS1 Instruction Manual page 15

Test Tone
(Con't)
Use test tone to check the speaker connection status or level.
To Manually Output Test Tone
REMOTE CONTROL
1
2
3
4
To stop test tone
•
28
√
Press MENU button, and then press ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "TEST-T MANU",
and then press ENTER button.
Press button to select the speaker you want.
Each time you press button, F.L CEN F.R S.R
•
S.L S.W will be selected in turn.
...†
Press button to set the test tone as you want.
• You can adjust the speaker output level from -10 to +10dB by 1 step.
• The sound gets quieter at -10dB and louder at +10dB.
Press MENU button once time.
"SETUP OFF" appears on the display and test tone stops.
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and the unit goes into Setup Mode.
2
Press FUNCTION button to select the "TEST-T MANU".
3
Press SURROUND MODE button.
Each time you press this button, F.L
•
will be selected in turn.
4
Press SELECT(
want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
• The sound gets quieter at -10dB and louder at +10dB.
To stop test tone
Press SETUP button once time.
•
"SETUP OFF" appears on the display and test signal stops.
Test Tone Output
F.L (front left) : -10 ~ +10dB
•
CEN (centre) : -10 ~ +10dB
•
F.R (front right) : -10 ~ +10dB
•
• S.R (surround right) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
GB
CEN F.R S.R S.L S.W
) button to set the test tone as you
,
29